SS Butt Hinges Price in India – Heavy Duty Stainless Steel Door Hinges

A door is only as good as the hinge that holds it. If the hinge is weak, the door will sag. If it rusts, the door will jam. If it breaks, the door falls. That is why picking the right SS Butt Hinges is so important.

If you are planning a construction project or renovating your home, you need to know the SS Butt Hinges price in India. But price alone is not enough. You need to understand what makes a hinge heavy duty, why stainless steel matters, and where to buy quality products.

In this blog, we break down everything about Stainless Steel Hinges for doors. We look at prices, grades, sizes, and why Crown ISI should be your first choice for bulk orders.

What Are SS Butt Hinges?

SS Butt Hinges are the most common type of hinge used on doors. The name comes from their shape. They have two flat plates called leaves. One leaf attaches to the door frame. The other attaches to the door edge. A pin joins them in the middle.

When we say SS, we mean Stainless Steel. This material is chosen because it does not rust. It stays strong for years. It looks clean and modern.

These hinges are used everywhere:

• Bedroom doors in homes
• Bathroom doors where water is present
• Office cabins and commercial spaces
• Hospitals and schools
• Factories and industrial buildings

Factors That Affect SS Butt Hinges Price in India

The price of SS Butt Hinges is not fixed. It changes based on several factors. Here is what you need to know before you buy.

1. Grade of Stainless Steel

The grade decides the quality and price. SS 304 is the most common grade for door hinges. It has 18% chromium and 8% nickel. This mix gives good rust resistance at a fair cost. SS 316 is marine grade. It has molybdenum to fight salt water. It costs more but is needed near the sea .

2. Size of the Hinge

Hinges come in different sizes measured in inches. Common sizes are:

• 3 inch – for small cupboards and light doors
• 4 inch – for standard internal doors
• 5 inch – for main doors and heavier frames
• 6 inch – for very heavy doors and commercial use

Larger hinges use more metal, so they cost more.

3. Thickness or Gauge

Gauge means how thick the metal is. Lower number means thicker metal. Common options are:

• 16 gauge – thinner, for light doors
• 14 gauge – medium, for normal doors
• 12 gauge – thick, for heavy duty use

Thicker hinges are stronger but also more expensive.

4. Finish and Polish

Some hinges come with a simple mill finish. Others are polished to look shiny and smooth. Polished hinges cost a little more but look better on modern doors .

5. Quantity and Bulk Buying

If you buy one or two hinges, you pay retail price. But if you buy in bulk from a manufacturer like Crown ISI, the per-piece price comes down. Dealers and contractors always buy bulk to save money.

SS Butt Hinges Price List 2026 (Approximate)

Market rates change based on steel prices. But here is a general idea of what you can expect to pay for Stainless Steel Hinges in 2026. These are approximate retail prices.

Note: These prices are estimates. For exact bulk rates, contact Crown ISI directly.

Why Choose SS 304 for Your Door Hinges?

SS 304 is the most popular choice for SS Butt Hinges in India. Here is why.

Corrosion Resistance

India has varied weather. Some places are humid. Some get heavy rain. SS 304 does not rust in these conditions. It forms a thin layer on the surface that protects the metal .

Strength and Durability

Doors open and close many times every day. The hinge takes this stress. SS 304 is strong enough to handle years of use without bending or breaking.

Low Maintenance

You do not need to paint SS 304 hinges. You do not need to oil them often. They stay looking good with just a simple wipe.

Food Safe Properties

SS 304 is used in kitchens and food industries because it is safe and does not react with food. This makes it perfect for kitchen cabinets and pantry doors.

Heavy Duty Hinges – When Do You Need Them?

Not all doors need heavy duty hinges. But some situations demand extra strength.

Heavy Wooden Doors

If your door is made of solid wood like teak or oak, it is heavy. Normal hinges may bend under the weight. Heavy duty Stainless Steel Hinges with 12 gauge thickness can handle this load.

Commercial and Industrial Use

Offices, schools, and factories have doors that open hundreds of times daily. Heavy duty hinges last longer in these high-traffic areas.

Main Entrance Doors

The main door of a home is usually bigger and heavier than internal doors. It needs strong hinges that will not sag over time.

Fire Doors

Fire doors are heavy by design. They need heavy duty hinges that can hold the weight and work properly in an emergency.

Quality Standards for SS Butt Hinges in India

In India, the government wants quality products for consumers. That is why BIS certification matters.

IS 12817 – The Standard for Stainless Steel Butt Hinges

The Bureau of Indian Standards has a specific standard for Stainless Steel Butt Hinges. It is called IS 12817 . This standard covers:

• Material requirements
• Dimensions and tolerances
• Strength and load capacity
• Corrosion resistance

When you buy hinges that meet IS 12817, you know they are made right.

The ISI Mark

The ISI mark on a product means it has passed BIS tests. It is not just a sticker. It is a promise of quality . At Crown ISI, we follow these standards strictly.

Testing Methods

Good hinges go through several tests :

• Salt Spray Test: To check rust resistance
• Load Test: To see how much weight the hinge can hold
• Cycle Test: To check durability after many openings
• Dimensional Check: To ensure correct size

Where to Buy SS Butt Hinges in India

You have options when buying Stainless Steel Hinges.

Local Hardware Stores

Local shops are convenient for small quantities. But prices are higher, and quality may vary.

Online Marketplaces

Sites like Flipkart and Amazon sell hinges . You can compare prices and read reviews. But for bulk orders, online may not give the best rate.

Direct from Manufacturer (Best for Bulk)

If you are a dealer, contractor, or builder, buying direct from a manufacturer like Crown ISI is the smart choice. You get:

• Factory prices with no middleman
• Consistent quality in every piece
• Custom packing options
• Timely delivery

Crown ISI – Your Trusted Partner for SS Butt Hinges

When you choose Crown ISI, you choose quality and reliability.

Who We Are

Crown Industries (Crown ISI) is based in Ghaziabad, Delhi NCR. We have been in the hardware business for years. We understand what Indian customers need .

What We Offer

• SS 304 Butt Hinges in all standard sizes
• Heavy duty options for commercial use
• Custom sizes and finishes on request
• Bulk supply at factory prices

Why Customers Trust Us

• We use genuine stainless steel, not cheap substitutes
• We follow BIS standards like IS 12817
• We test our products for strength and rust resistance
• We deliver on time, every time

Tips for Buying SS Butt Hinges

Here is simple advice to help you buy right.

Check the Grade

Make sure the hinge is really SS 304. Some sellers pass off lower grades. Buy from trusted names like Crown ISI.

Feel the Weight

A good hinge has weight. If it feels too light, the metal may be thin.

Look at the Finish

The surface should be smooth. Rough spots can trap dirt and moisture.

Match the Size

A 4 inch hinge is enough for most internal doors. For main doors, go for 5 inch or 6 inch.

Buy Extra

If you are buying for a project, get a few extra hinges. It helps if you need replacements later.

Conclusion

A small hinge does a big job. Do not trust cheap metal that will rust and fail. Invest in quality SS Butt Hinges that will hold your doors safely for years.

For the best SS Butt Hinges price in India and guaranteed quality, choose Crown ISI. We are a trusted Stainless Steel Hinges manufacturer serving dealers and contractors across the country.

Contact Crown ISI today for bulk orders and factory direct pricing.

Frequently Asked Questions (FAQs)

1. What is the price of SS Butt Hinges in India?

The price varies by size, thickness, and grade. A standard 4 inch SS 304 hinge costs between ₹45 to ₹65 retail. Heavy duty 6 inch hinges cost more. For bulk rates, contact Crown ISI.

2. What is the difference between SS 304 and SS 316 hinges?

SS 304 is standard stainless steel for general use. SS 316 has molybdenum added, which makes it resistant to salt water and chemicals. SS 316 costs more and is used near the sea .

3. What size hinge do I need for my door?

For standard internal doors, 4 inch hinges work well. For main doors, use 5 inch or 6 inch. Heavier doors need larger hinges. Measure your door thickness and weight to decide.

4. Are SS butt hinges corrosion resistant?

Yes. Genuine SS 304 hinges resist corrosion from moisture and normal weather. They are perfect for bathrooms and kitchens. For coastal areas, choose SS 316 for extra protection .

5. What does 14 gauge mean in hinges?

Gauge refers to metal thickness. Lower number means thicker metal. 14 gauge is thicker and stronger than 16 gauge. Heavy doors need 14 gauge or 12 gauge hinges.

6. Can I buy SS butt hinges in bulk from Crown ISI?

Yes. Crown ISI specializes in bulk supply for dealers and contractors. You get factory pricing and consistent quality. Contact us with your requirements.

7. What is IS 12817 standard?

IS 12817 is the Indian Standard for stainless steel butt hinges . It covers material, dimensions, strength, and testing. Crown ISI follows this standard.

8. How do I know if a hinge is good quality?

Look for the ISI mark. Check the finish for smoothness. Feel the weight. Buy from trusted manufacturers like Crown ISI who test their products .

9. Do you make custom size hinges?

Yes. As a leading manufacturer, Crown ISI accepts custom orders. Tell us your required size and quantity, and we will make it for you.

10. How can I contact Crown ISI for a quote?

You can reach Crown Industries (Crown ISI) in Ghaziabad. Share your requirements for size, grade, and quantity. We will respond with the best price.